The griffins are moulded fiber of some sort the wood is poplar. Frames re-glued and stripped. The decoration above the Griffin was reproduced using polyester autobody filler, used it to make the mould as well as the repro. [twentytwenty] [/twentytwenty]

This piece had water sit on the top , much loose veneer. Also some previous repairs done using epoxy had come loose. These pictures are during and after I made these inlay strips to replace missing and rotted sections. [twentytwenty] [/twentytwenty] After filling and sanding color was adjusted two coats of penetrating oil applied, shellacked

[twentytwenty] [/twentytwenty] Posted by Hinman Restorations on Wednesday, July 24, 2013